Schneider Electric Conext SCP: Solar System Control Panel

Description

SCHNEIDER ELECTRIC CONEXT SCP: SOLAR SYSTEM CONTROL PANEL

The Conext System Control Panel (SCP) eliminates the need for separate control panels for each device and gives a single point of control to set up and monitor the entire Conext inverter charger system, including Conext MPPT Solar Charge Controllers. Featuring a graphical backlit liquid crystal display, the SCP selectively displays configuration, status and diagnostic information for all devices connected to the Xanbus network.

Parts Included: 1 remote head; 1 network terminal; 1 Cat5 cable; 1 mounting plate; 1 mounting bracket; 4 #8 screws; 2 #6 screws

FEATURES:

• Monitor and configure Conext XW+, SW, MPPT 60 150, MPPT 80 600, AGS, Battery Monitor
• Multiple SCP can be used on the same Xanbus network
• Compatible with Conext ComBox
• Access and troubleshoot Xanbus enabled devices on the network from one location
• Surface mount or panel mount on wall
• RJ45 connections for Xanbus network cables
• Internal clock—keeps time for the entire system
• Audible alarm—if enabled, alerts you when a fault condition arises
• Low power consumption—automatically turns off the backlight after a period of inactivity
• Non-volatile memory—preserves SCP settings if network power is interrupted or network communication is disrupted
• 5 Year Warranty

ELECTRICAL /MECHANICAL CHARACTERISTICS:

• Nominal Voltage- 15 VDC
• Min Operating Network Voltage 14.25 VDC
• Max Operating Network Voltage 15.75 VDC
• Max Operating Current at Nominal Voltage 200 mA
• IP rating / location IP20/indoor only
• Operating Temperature Range -20 to 50ºC (-4ºF to 122ºF)
• Network Protocol: Xanbus / Connectors: RJ45
• Safety CSA 107.1, UL 458 4th Ed

More Information Here- https://solar.schneider-electric.com/product/conext-system-control-panel-scp/